Pulleys & Pulley Systems

This is 11mm Static Kernmantle Rigging Rope. Perfect fit for our aerial pulleys and ready to support any aerial artist during the show. This rope is rated for over 7300lbs (33.3 kN).

Strength rating over 7,300lbs (33.3 kN).

Material: Polyester / Nylon Core Weight per meter: 90 g/m.

Elongation: 2.2% at 1.35kn (300lbs) - 4.4% at 2.7kn (600 lbs) - 7.4% at 4.4kn (1000lbs).

We recommend this pulley system for use on portable aerial rig so that load is distributed evenly across your rig.  This pulley system can also be used to lift performers on a portable rig.

This system is designed for use on our 20ft portable rig, and it can be used on most portable rigs of a similar height. This system does require points to clip into on the header and feet of your rig. If you need to create rig points on the header of your rig, we recommend our 12 inch sling loops.

This pulley system includes:

• 80ft Rigging Rope
• 6 Autolocking Oval Carabiners
• 1 Double Pulley
• 3 Single Pulleys

This is a single pulley system that can be used for raising and lowering equipment in high ceilings. This system will require that you already have a secure point on your floor or wall to tie off to.

This single pulley system includes:

• Rigging Rope: choose from 50ft, 80ft, 100ft, 150ft, or 200ft
• 2 Autolocking Carabiners: choose from Oval, D, or XL
• 2 Single Pulleys

This is a double pulley system that can be used for lifting performers by hand with a 4:1 mechanical advantage.

This double pulley system includes:

• Rigging Rope: choose from 50ft, 80ft, 100ft, 150ft, or 200ft
• 3 Autolocking Steel D Carabiners
• 2 Double Pulleys
• 1 Single Pulley

Designed for up to 15mm rigging rope and ready to set up with our portable rigs or any flying setup.

They have a very long lasting a durable powder coating covering their aircraft aluminum alloy body.

These pulleys feature side swing openings for easier rigging and stainless steel ball bearings for smooth action.

This stainless steel floor plate is designed for anchoring to concrete floors for tying off your pulley system.

This plate attaches with .5" bolts. The plate measures 5" x 7" x 1.8" and has three attachment points.

This whole kit can be set up to fly away your aerial apparatus when not in use.

Each Fly Away Kit comes with:

• Approximately 50ft of 1/4" solid braid nylon fly away rope
• Stainless steel, 12" wall clete
• 25mm Stainless steel pulley with combined swivel top
• Stainless steel connecting clip